If you already have ESXi installed and have a way to get files onto the box, you can just copy the vib file to the machine and run "esxcli software vib install ". Mount the ISO under the IP KVM as virtual media, change boot order in the BIOS and proceed with installation! Replace the current e1000e driver in your VMware 5.1/5.5 iso with this one using ESXi CustomizerĤ. Extract it, and copy out the vib20\net-e1000e\VMware_bootbank_net-e1000e_1.1.2-3vmw.500.60.vib file, this is the old e1000e driver that works with the X7DCA-L.ģ. Download the ESXi 5.0 vib update zip from VMware.Ģ. Otherwise, follow the instructions below before installing ESXi 5.1/5.5:ġ. I have prepared a modified ESXi 5.5.0 ISO following the steps below, which you can download here if you'd prefer. The driver from ESXi 5.0 is compatible and confirmed working. The Supermicro X7DCA-L will work with ESXi 5.1/5.5, but requires an older version of the e1000e driver to be installed, otherwise you will have no network connectivity after installation. If you would like to install a later version of ESXi, you may ask for a temporary IP KVM setup. Dacentec's provisioning module currently only supports 5.0.These issues can be mitigated by using an older driver for the NIC, please see workarounds. ESXi 5.1+ is known to have some issues with the e1000 Gigabit controllers in our equipment.Versions 5.1 and above have been known to work with slight modifications on some devices, which we will cover in detail below. All products available should support ESXi 5.0 as is.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |